Rule-Mate 800 Submersible Bilge Pump

Description

The Rule-Mate consists of a powerful Rule bilge pump and a new non-mercury float switch in a single housing

• Connections: For 19mm (3/4"), 25mm (1") or 29mm (1 1/8") bore hose on inlet and outlet. Straight or 90º Elbow
• Dimensions: 112mm high, 130mm long, 73mm wide.
• Fuse Size: 5(amp)
• Output: Up to 56 litres/minute (12 gallons/minute). Max. recommended discharge head 3m.
• Fully automated bilge pump with integral sensor.
• Back up feature to prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode.
• Compact pump for smaller vessels.
• Tough plastic body.
• Back flow prevention to reduce the amount of water left over in the bilge,
• Air Vents in the body to help prevent air locks in challenging installations.
• Quick release inlet strainer allows rapid cleaning.
• Low amp draw conserves batteries.
• Ignition protected.
• Packaged Dimensions: L:18.00 x H:8.00 x W:20.00cm